Koolance CPU-300-V13 Bedienungsanleitung PDF herunterladen (Seite 2)

For AMD Athlon/XP processors, the left or right receptacles will be used,

depending on which direction the CPU socket faces in relation to the cooler.

For Intel P-4, Xeon, AMD Athlon 64, or Opteron processors, use the center

hole.

Screw alignment

for right-side AMD

Athlon/XP

processors

Screw alignment for

left-side AMD

Athlon/XP

processors

Screw alignment

for P-4/Xeon and

Athlon 64/Opteron

processors

With the bracket properly aligned, insert and slowly twist the tension screw

until it can no longer be tightened. Over-tightening is prevented by a

ratcheting action.

3 center holes

correspond with

different CPU

socket positions

Due to different contact pressure requirements, two tension screws are

included with the CPU-300. Use the BLUE screw for “open die” processors,

such as: AMD Athlon/XP or Intel P-III. Use the BLACK screw for processors

with heat spreaders, such as: Intel P-4, Xeon, or AMD 64/Opteron.

Intel P-4/Xeon & AMD 64/

Opteron Black Screw

AMD Athlon/XP Blue Screw

CAUTION: Installing the incorrect tension screw for your processor

may result in hardware damage.

CAUTION: Installing the tension screw into the wrong cooler

receptacle can cause insufficient cooler contact, and may result in

hardware damage.

1 2

Keine Kommentare

Koolance CPU-300-V13 Bedienungsanleitung Seite 2